Bakers Pride Oven BLF-FC User Manual download pdf (Page 5)

Automatic Lift Fryer Introduction

Specific Precautions

Risk of fire exists if the oil level drops below 5mm of the maximum oil level.

Use of oil/shortening older than the manufacturers recommendations for life of

the oil is prone to surge boiling and flash fires. Follow the oil manufacturers

guidelines for the life cycle of oil/shortening.

Do not open the drain valve or the fill valve while the fryer is under pressure.

Serious burns may result.

Follow operator instructions regarding effects of surge boiling of over-wet foods

and proper load size.

This unit may incorporate components that contain Mercury. The use of Mercury

relays is an industry standard.

Equipotential ground plane

When a high current flows through a conductor, differences in potential appear

between the conductor and nearby metallic surfaces near the appliance. As a

result, sparks may be produced between the appliance and surrounding metal

surfaces. These sparks could cause serious injury, damage, or fire.

BKI provides an Equipotential ground terminal for the connection of a bonding

conductor after the installation of the appliance per lEC60417-1. This terminal is

located on the inside of the Power Entry Supply box near the Earth connection

and is marked with this symbol.

Full Disconnection

In accordance with Local and/or National wiring codes, the installer must provide

a means of full disconnection under over voltage Category III conditions. An IEC

approved cord and plug combination will meet this requirement.

Units not provided with a cord and plug do not meet this requirement. In

accordance with Local and/or National wiring codes, the installer must provide

the means of full disconnection.

The fryer is designed to hold a maximum of 75 lb (34 kg) of oil/shortening.

1 2 3 4 5 6 7 8 9 10 ... 31 32

No comments

Bakers Pride Oven BLF-FC User Manual Page 5